EAW Steel Picatinny, Steyr Mannlicher L

Introduction

Picatinny rail consists of slots with 5.23 mm spaces between one another, which means that it can be used across its entire length. It is simple to mount and interchangeable – if something is made for a Picatinny rail, it will fit regardless of the manufacturer or manufacturing date. It is affordable, resilient and reliable – this is why it so commonly used by professionals and military. Because of all its great qualities, Picatinny rail has been dominating the rail market in the recent years.

Picatinny is a big step forward from the Weaver standard. Weaver has a few predesignated slots while Picatinny has slots all over its surface, allowing the device to be mounted wherever the user finds it fitting. Weaver's slot is 3.8 mm wide, which is why ring mounts made for a Weaver rail will also fit on a Picatinny rail while ring mounts made specifically for a Picatinny rail will not fit on a Weaver rail. This is one of the main reasons why Picatinny is a far better mounting solution.

EAW is a German company, known for producing top-quality mounts. Their Picatinny rails, which are all made from steel, have a nice finish and come with a unique channel in the middle, allowing the user to clearly see the rifle's sights. Screws are included. EAW chooses only the best materials for their products. All of these great features; however, come at quite a steep price.

About the rifle

Steyr Mannlicher, a renowned company that produces firearms, was founded in 1864 by Josef Werndl. It soon grew into a big company with great production capacity. In 1882, they faced a small crisis because of lack of large orders (they have supplied the European armies with breech-loading rifles – demand has declined). This is when Werndl used the company's production capacity to manufacture all sorts of products along with firearms: dynamos, electric motors, light bulbs, bicycles, cars, trucks. The company's most active years were without a doubt during World War I when more than 4000 firearms were made daily by its 15.000 employees. The company's name was changed to Steyr-Daimler-Puch AG in 1987.

Steyr Mannlicher L is a bolt-action rifle that is a part of Model 67 series, also known as the 1969 range (the weapon was introduced in 1967 but was put on the market in 1969). L stands for light/Leicht. The rifle locks with six locking lugs at the rear of the bolt. The barrel is cold forged and it features a rotating magazine with a 5-round capacity. Steyr Mannlicher chambered these rifles for 5.6x57, .243 Win., .308 Win., .22-250 Rem. and 6 mm Rem. The standard rifle is 108 cm long while Stutzen and Mountain versions are 99 cm long. There are four holes drilled and tapped on the rifle's receiver – 2 on each side of the action. The safety catch is located on the right side of the receiver.

A: 10 mm
B: 88.3 mm
C: 10 mm
BHU: 0 mm
Fi: M4x0.5
R1: R15
R2: R15

Mounting instructions

Remove all the stains (grease, oil etc.) from the rifle's receiver with a cleaning fluid (acetone). Once the surface is clean and dry, check whether the screws match the rail and the holes on the receiver. Make sure that the Picatinny rail is compatible with the rifle by inspecting the mounting holes on both. Before mounting the rail permanently, apply a minimal amount of thread-locking fluid 278 or 648 on screws and contact surfaces. Be careful not to get the fluid in or near the mounting holes. Carefully clean the remaining excess fluid around the rail with a cleaning fluid. Using a torque driver, screw the screws appropriately (up to 2.2 Nm) – do not overtighten.

Warranty

The product has a warranty period of 30 years.